https://doi.org/10.3390/polym13050683 ·
Видання: Polymers, 2021, №5, с.683
Видавець: MDPI AG
Автори:
- Xinfeng Wu
- Yuan Gao
- Tao Jiang
- Ying Wang
- Ke Yang
- Tengshi Liu
- Kai Sun
- Yuantao Zhao
- Wenge Li
- Jinhong Yu
Анотація
Because the aerogel has ultra-low density and good impact resistance, the aerogel material, epoxy-hardener system, and expandable polystyrene beads (EPS) were used to prepare the lightweight aerogel reinforced hollow epoxy macro-spheres (AR-HEMS). The multi-phase epoxy syntactic foam (ESF) was manufactured with the epoxy-hardener system, HGMS (EP-hardener-HGMS), and AR-HEMS by “the compression modeling method.” In this experiment, in order to enhance the strength of the ESF, some different kinds of the carbon fiber (CF) were added into the EP-hardener-HGMS system (CFR-EP). The influence of the volume stacking fraction, inner diameter, and layer of the AR-HEMS and the content and type of the CF in the EP-HGMS (CFR-EP) system on the compressive strength of the ESF were studied. Weighing the two factors of the density and compressive strength, the ESF reinforced by 1.5 wt% CF with 90% AR-HEMS has the better performance. This kind of the ESF has 0.428 g/cm3 nd 20.76 Mpa, which could be applied in 2076 m deep sea.
Джерела фінансування
- China Postdoctoral Science Foundation
- the Special Fund of the National Natural Science Foundation of China
Список літератури
- Qin, C., Yao, M., Liu, Y., Yang, Y., Zong, Y., and Zhao, H. (2020). MFC/NFC-Based Foam/Aerogel for Production of Porous Materials: Preparation, Properties and Applications. Materials, 13.
https://doi.org/10.3390/ma13235568 - Zhi, C., Du, M.J., Sun, Z.L., Wu, M.J., He, X.Y., Meng, J.G., and Yu, L.J. (2020). Warp-Knitted Spacer Fabric Reinforced Syntactic Foam: A Compression Modulus Meso-Mechanics Theoretical Model and Experimental Verification. Polymers, 12.
https://doi.org/10.3390/polym12020286 - Wu, Fabrication of syntactic foam fillers via manipulation of on-chip quasi concentric nanoparticle-shelled droplet templates, Lab Chip, № 20, с. 4600
https://doi.org/10.1039/D0LC00730G - Kmetty, A., and Litauszki, K. (2020). Development of Poly (Lactide Acid) Foams with Thermally Expandable Microspheres. Polymers, 12.
https://doi.org/10.3390/polym12020463 - Wu, Recent developments on epoxy-based syntactic foams for deep sea exploration, J. Mater. Sci., № 56, с. 2037
https://doi.org/10.1007/s10853-020-05420-w - Panteghini, On the compressive strength of glass microballoons-based syntactic foams, Mech. Mater., № 82, с. 63
https://doi.org/10.1016/j.mechmat.2014.12.005 - Wu, Preparation and Investigation of Epoxy Syntactic Foam (Epoxy/Graphite Reinforced Hollow Epoxy Macrosphere/Hollow Glass Microsphere Composite), Fibers Polym., № 19, с. 170
https://doi.org/10.1007/s12221-018-7584-y - Dando, Nano-additive reinforcement of mixture epoxy syntactic foams, J. Thermoplast. Compos. Mater., № 33, с. 1674
https://doi.org/10.1177/0892705719835282 - Bakshi, M.S., and Kattimani, S. (2021). Study of mechanical and dynamic mechanical behavior of halloysite nanotube-reinforced multiscale syntactic foam. J. Appl. Polym. Sci., 138.
https://doi.org/10.1002/app.49855 - Phillips, B.T., Licht, S., Haiat, K.S., Bonney, J., Allder, J., Chaloux, N., Shomberg, R., and Noyes, T.J. (2019). DEEPi: A miniaturized, robust, and economical camera and computer system for deep-sea exploration. Deep-Sea Res. Part I Oceanogr. Res. Pap., 153.
https://doi.org/10.1016/j.dsr.2019.103136 - Bao, Static and impact responses of syntactic foam composites reinforced by multi-walled carbon nanotubes, J. Mater. Res. Technol. Jmr&T, № 9, с. 12391
https://doi.org/10.1016/j.jmrt.2020.08.079 - Afolabi, Syntactic foams formulations, production techniques, and industry applications: A review, J. Mater. Res. Technol. Jmr&T, № 9, с. 10698
https://doi.org/10.1016/j.jmrt.2020.07.074 - Ding, J., Liu, Q., Zhang, B., Ye, F., and Gao, Y. (2020). Preparation and characterization of hollow glass microsphere ceramics and silica aerogel/hollow glass microsphere ceramics having low density and low thermal conductivity. J. Alloy. Compd., 831.
https://doi.org/10.1016/j.jallcom.2020.154737 - Kannan, S., Pervaiz, S., Alhourani, A., Klassen, R.J., Selvam, R., and Haghshenas, M. (2020). On the Role of Hollow Aluminium Oxide Microballoons during Machining of AZ31 Magnesium Syntactic Foam. Materials, 13.
https://doi.org/10.3390/ma13163534 - Bethke, C., Sanchez-Vazquez, S.A., Raps, D., Bakis, G., Bard, S., Uy Lan Du, N., and Volker, A. (2019). Effect of Resin and Blocked/Unblocked Hardener Mixture on the Production of Epoxy Foams with CO2 Blocked Hardener in Batch Foaming Process. Polymers, 11.
https://doi.org/10.3390/polym11050793 - Yang, Q., Cheng, J., Wei, Y., Yu, B., Miao, Z., and Gao, P. (2021). Innovative compound casting technology and mechanical properties of steel matrix syntactic foams. J. Alloy. Compd., 853.
https://doi.org/10.1016/j.jallcom.2020.156572 - Shahapurkar, Compressive behavior of crump rubber reinforced epoxy composites, Polym. Compos., № 42, с. 329
https://doi.org/10.1002/pc.25828 - Feng, Effects of different "rigid-flexible" structures of carbon fibers surface on the interfacial microstructure and mechanical properties of carbon fiber/epoxy resin composites, J. Colloid Interface Sci., № 583, с. 13
https://doi.org/10.1016/j.jcis.2020.09.005 - Fang, Construction of carbon nanorods supported hydrothermal carbon and carbon fiber from waste biomass straw for high strength supercapacitor, J. Colloid Interface Sci., № 582, с. 552
https://doi.org/10.1016/j.jcis.2020.07.139 - Lee, J., Lacy, T.E., and Pittman, C.U. (2021). Coupled thermal electrical and mechanical lightning damage predictions to carbon/epoxy composites during arc channel shape expansion. Compos. Struct., 255.
https://doi.org/10.1016/j.compstruct.2020.112912 - Paget, B., Zinet, M., and Cassagnau, P. (2020). Syntactic foam under compressive stress: Comparison of modeling predictions and experimental measurements. J. Cell. Plast.
https://doi.org/10.1177/0021955X20943112 - Wu, Preparation and Mechanical Properties of Carbon Fiber Reinforced Multiphase Epoxy Syntactic Foam (CF-R-Epoxy/HGMS/CFR-HEMS Foam), Acs Omega, № 5, с. 14133
https://doi.org/10.1021/acsomega.0c01744 - Halvaei, M., Jamshidi, M., Latifi, M., and Ejtemaei, M. (2020). Effects of volume fraction and length of carbon short fibers on flexural properties of carbon textile reinforced engineered cementitious composites (ECCs); an experimental and computational study. Constr. Build. Mater., 245.
https://doi.org/10.1016/j.conbuildmat.2020.118394 - Unterweger, C., Mayrhofer, T., Piana, F., Duchoslav, J., Stifter, D., Poitzsch, C., and Furst, C. (2020). Impact of fiber length and fiber content on the mechanical properties and electrical conductivity of short carbon fiber reinforced polypropylene composites. Compos. Sci. Technol., 188.
https://doi.org/10.1016/j.compscitech.2020.107998
Публікації, які цитують цю публікацію
Experimental study on the effect of basalt fiber reinforced expanded polystyrene foams on the compressive strength of lightweight concrete
Zheng Cao, Tao Jiang, Ying Wang, Erke Wang, Lixue Xiang, Bo Tang, Xinfeng Wu, Wei Shao, Wenge Li, Kai Sun, Danda Shi
https://doi.org/10.1063/5.0193756 ·
2024, AIP Advances, №3
Scopus
WoS
Цитувань Crossref:0
Study of the Compressive Properties of Heavy Calcium Carbonate-Reinforced Epoxy Composite Spheres (HC-R-EMS) Composite Lightweight Concrete
Rong Ma, Zheng Cao, Tao Jiang, Ying Wang, Shanshan Shi, Wenge Li, Yuantao Zhao, Ning Zhong, Danda Shi, Xinfeng Wu
https://doi.org/10.3390/polym15051278 ·
2023, Polymers, №5, с.1278
Scopus
WoS
Цитувань Crossref:0
Synthesis and characterization of EPS reinforced modified castor oil-based epoxy biocomposite
Ercan Aydoğmuş, Mustafa Dağ, Zehra Gülten Yalçın, Hasan Arslanoğlu
https://doi.org/10.1016/j.jobe.2021.103897 ·
2022, Journal of Building Engineering, с.103897
Scopus
WoS
Цитувань Crossref:17
Recent Trends in Polymer Matrix Solid Buoyancy Materials: A Review
Xingcan Lu, Yu Li, Ze Chen, Shuaijie Li, Xiaoyan Wang, Qing Liu
https://doi.org/10.3390/polym16162307 ·
2024, Polymers, №16, с.2307
Scopus
WoS
Цитувань Crossref:0
Знайти всі цитування публікації
Дані публікації
Кількість цитувань | 3 |
Кількість джерел у списку літератури: | 24 |
Видання індексується в Scopus | Так |
Видання індексується в Web of Science | Так |